Cupboard and wardrobe light

• Strong LED-light
• Light and movement sensor
• Dimmer switch

This flexible cabinet and wardrobe lamp creates extra light in dark cupboards, wardrobes and drawers. The lamp comes on automatically when you open the wardrobe door and lights up the area with a strong warm white light when you are in the vicinity.

This small lamp has a light sensor and a motion sensor so that it can light up dark corners when it detects motion. If the room is bright enough, the light turns off to save battery power.

The LED light has three settings; Sensor, On and Off. To switch between them, press the Power button. One press turns on the sensor mode (the lamp lights up when it senses motion in the dark); press again to turn the light ON (the light stays on constantly); press a final time to turn the lamp off.

When the lamp is set to the ON setting, you can adjust the brightness by pressing and holding the Power button for several seconds. To activate the dimmer function, release the button, and then press and hold again.

The light remembers the last brightness setting you selected; it will resume that same brightness even after you switch it off.

The light is powered by 4 alkaline AAA batteries (purchased separately) and is attached with double-sided 3M tape. Clean the surface and make sure it is free from dirt and grease stains before you attach the lamp. NOTE! The lamp does not work with rechargeable batteries.

The wardrobe light is for indoor use only but can be used in temperatures of max 40° C heat to min -20° C. Bear in mind that battery life is significantly reduced when the light is exposed to sub-zero temperatures.

Measurements: 12.5 cm x 3.5 cm x 2 cm
Batteries: 4 alkaline AAA batteries (purchased separately)
Battery life: 20h
Colour temperature: 3000K
Light flux: 35 lumen
Colour rendering index: 80 (CRI/Ra)
IP code: IP20
Does not work with rechargeable batteries.