Rechargeable sensor lamp

• Lights up in the dark by movement
• Dimmable lamp with four different light modes
• Discrete design with smart magnetic mount

This rechargeable sensor light is smart to use in cabinets, drawers, storage areas, shelves, pantry, stairs, over the sink, in closets and other poorly lit indoor places where you need some extra light. The SensorLight has a discreet design, energy-saving LED lamps and a night-activated motion sensor that ensures the light only comes on when you need it.

Energy-saving motion sensor

The smart motion sensor detects movement and turns on the light when you open the cabinet, pull out the drawer or walk near the sensor in a dark room. To save battery power, the light only comes on when the environment is dark. The light stays on for 25 seconds after each detected movement and then turns off automatically.

The motion sensor, energy-saving LEDs and automatic switch-off ensure that the lamp does not stand and draw battery unnecessarily and is only used when needed.

Four selectable colour temperatures with dimmable brightness

The lamp can shine with a cool white glow, a natural white glow and a warm white glow depending on the type of light you want. You can also choose to have all LEDs lit at the same time for maximum illumination.

Press the ON button repeatedly to select the kind of glow you want the lamp to produce. By pressing and holding the ON button, you can also dim or increase the brightness as needed.

Easy to remove with magnetic mounting

On the back of the lamp is a thin magnet that attaches to all magnetic surfaces. When you want to attach the wardrobe lamp to a non-magnetic surface, use the self-adhesive magnetic strip provided. The 3M adhesive on the magnetic strip sticks well to almost any surface. Make sure the surface is clean, dry and smooth before sticking the magnetic strip.

Charged with supplied USB cable

The rechargeable battery of the sensor light is charged with the supplied USB cable. The light is easy to detach from the magnetic strip and can be charged in any USB socket.

Specifications
The sensor lamp is available in three different sizes: small, medium and largeI The packaging: sensor lamp, adhesive magnetic strip, charging cable and instructions for use

General information about the sensor lamps
For indoor use only
Light modes: cold white light, natural light, warm white light, all LEDs
Dimmable: yes
Enclosure rating: IP20
PIR motion sensor
SMD LED light emitting diodes
3 year warranty

Sensorlampa Small

Dimensions: 15 cm x 2.8 cm x 1.3 cm
Power: 0.3W
Rechargeable battery: Li-Po 3,7V, 350 mAh

Cold white light: 50 lux, range 7 metres, 3.5 hours burn time
Natural white light: 50 lux, range 7 metres, 3.5 hours burn time
Warm white light: 52 lux, range 7 metres, 3.5 hours burn time
All LEDs simultaneously: 58 lux, range 8 metres, 3.25 hours burn time

Sensorlampa Medium

Dimensions: 25 cm x 3.5 cm x 1.3 cm
Power: 0,5W
Rechargeable battery: Li-Po 3,7V, 600 mAh

Cold white light: 79 lux, range 9 meters, 4 hours burn time
Natural white light: 75 lux, range 9 metres, 4.25 hours burn time
Warm white light: 79 lux, range 9 metres, 4 hours burn time
All LEDs simultaneously: 90 lux, range 9 metres, 3.75 hours burn time

SensorLight Large

Dimensions: 35 cm x 3.5 cm x 1.5 cm
Power: 0.7W
Rechargeable battery: Li-Po 3.7V, 800 mAh

Cold white light: 102 lux, range 10 metres, 4.5 hours burn time
Natural white light: 98 lux, range 10 metres, 4.5 hours burn time
Warm white light: 104 lux, range 10 metres, 4.5 hours burn time
All LEDs simultaneously: 115 lux, range 11 metres, 4 hours burn time