Wireless doorbell with Wi-Fi camera

• Connects to your Wi-Fi
• See and talk to the caller
• Indoor receiver with several ringtones

With this wireless doorbell, you can both see and speak to the person ringing the doorbell. With the app, you connect the doorbell to your Wi-Fi so that you receive notifications, and can in real-time follow what is happening outside your door, in your smartphone or tablet.

The built-in Wi-Fi camera films at a 130-degree angle with 720p/30 fps, which gives a clear and high-resolution image. By sharing access to the camera with your family members, up to four people can simultaneously watch the live stream from the camera in the app when someone calls or walks past the door.

The camera has night vision which allows you to see who is standing outside, even when it is dark. The doorbell also has a built-in microphone and loudspeaker, so you can talk to the person standing outside the door.

Together with the doorbell, you also get an indoor receiver that you plug into an electrical socket. The indoor receiver communicates wirelessly with the doorbell and rings when someone is standing outside the door or pressing the bell. You can choose from 52 different ringtones and control the volume of the indoor receiver.

In the app, you can set how sensitive the motion sensor should be. Choose between High, Medium or Low sensitivity. With high sensitivity, you will get messages about every movement (uses a lot of battery). With average sensitivity, you do not receive messages as often (average battery life). With low sensitivity, you rarely receive messages (maximum battery life).

The doorbell comes with 2 rechargeable 18650-lithium batteries. You charge them with a Micro USB cable in a 1A wall charger (purchased separately). The batteries are fully charged in about 7 hours and provide approximately 2-3 months of battery life.

Before installing the doorbell, you should check that your Wi-Fi reaches the place where you want the doorbell to sit. The doorbell should not be below shoulder height. It then makes it easier to be close to your router when you install the doorbell, so that you can mount it in the desired location. The doorbell only supports 2.4 GHz Wi-Fi (not 5GHz).

The rear mounting plate is mounted with two screws on your door or wall. You also receive a safety screw that makes it difficult to remove the doorbell from the door.

The camera has space for an external MicroSD card (not included). This means that if you buy a storage card, the camera can also record film clips. It is also possible to purchase cloud storage in the app. With the recording function, you can go back and watch the videos where the camera has detected movement. If you do not have cloud storage or a MicroSD card, a screen clip is saved when the camera detects movement.

Keep in mind that the camera uses more battery when using the recording function, the live-feed function, and also the doorbell's microphone and loudspeaker.

The Denver Smart Home app is free and available for both Android and iOS.
The doorbell from Denver Electronics is Tuya Smart Home compatible.

Height: 16 cm
Width: 6.5 cm
Depth: 3.5 cm
Weight: 460 grams
Waterproof: IPX4