- Warm the room twice as fast
- Up to 22% lower energy costs
- Sound in operation only 22 dB
SpeedComfort radiator panel is a smart panel solution that makes heating from radiators faster and more efficient. The element fan allows for twice as fast heating and at the same time reduces energy consumption by up to 22%, reducing both costs and environmental impact. The heater is also quiet in operation with a sound level of only 22 dB.
Optimise heating and save energy
With a radiator fan, heat is distributed more evenly and quickly in the room, allowing you to lower the thermostat by 1–2 degrees without compromising comfort. By utilising the heat from the radiators more efficiently, the temperature of the household boiler can also be lowered to 60 degrees. This reduces energy consumption and can provide up to 22% lower energy costs while contributing to more sustainable heating. The fans are automatically activated when the element temperature reaches 33 degrees and switched off when it drops below 25 degrees.For different elements
Fix the fan under the element with magnets or place them with the included feet. When the radiator is raised, the flaps are automatically activated and switched off when the water level drops. This makes SpeedComfort a simple and automatic solution for optimising heating.How to use
SpeedComfort is easy to install and suitable for different types of radiators and convectors. For standard radiators with two or three plates and at least 7 cm of space between them, the flame is placed at the bottom between the plates and fixed with magnets. If the spacing between the plates is less than 7 cm, the magnets can be pulled out and folded, which means that the tile can still be held under the element. For single plate elements, the magnets are placed on the back of the element and the flange is placed underneath. For convectors, the accompanying brackets are used, which allow the fan to be placed under the convector.Select the Mono set for elements 40–70 cm wide, the Duo set for 70–120 cm and the Trio set for 120–180 cm.
Specifications
Material: Plastic
Weight: 343 g (per fan)
Colour: White
Length: 34 cm
Width: 7 cm
Height: 2.2 cm
Sound level: 22 dB
Length, adapter cable: 180 cm
Length, sensor cable: 60 cm
Length, connection cable: 30 cm
Power supply: 12V
Air circulation capacity (m³/h): 30 m³
Activation temperature: 33°C
Discharge temperature: 25°C
Compatibility: Element and convectors
Energy saving: up to 22%
Yearly energy consumption: < 1 kWh
Number per package: 1-3
Country of manufacture: Netherlands
![% text('country_no') %]](/themes/enterprise/design/bilder/flags/no.svg)
