- Can be mounted in several ways
- Facilitates cleaning and wiring
- Fits normal-sized socket strips
With this Swedish-designed branch socket extender holder, you can attach a socket strip in a more easily accessible manner and more easily mount it out of sight. With the flexible bracket, you can mount the socket strip where you need it most, for example on a desk leg, under the TV bench, on the side of a storage shelf or directly on the wall.
The socket strip holder fits normal-sized extension sockets and can be attached in several ways, either with cable ties, straps or with screws (not included). The flexible metal sides hold the branch socket in a firm grip. If the branch socket is a little too thin, then compress the metal sides before you push in the branch socket from the side.
By removing the socket strip from the floor, you can access the plugs more easily. It will also be easier to keep wires tidy and make cleaning easier thanks to there being less cables on the floor.
Attach socket strips to table legs or shelves
The holder can be attached to both square and round table legs and shelf legs. The easiest way is to use cable ties or straps to fasten the socket strip to the leg. Tighten firmly and then slide the socket strip into the holder from the side.
Wall bracket socket strip
You can also wall mount the socket strip by screwing it to the wall. Use 4 suitable screws (and plugs where needed) to screw the holder to the wall. Then slide the branch socket into the holder from the side.
NOTE! Plug outlets, cable ties, straps and screws are not included.
You can buy openable cable ties here ->
Height: 13 cm
Width: 6.5 cm
Depth: 4.3 cm
Weight: 100 grams
Fits socket strips with a maximum width of 5.5 cm