Tail rope holder for Y-beam

• Smart for sailboats and larger motorboats
• Mounted with cable ties on the Y-beam
• Room for at least two tail ropes

Mr Mooring is a smart tail rope holder that makes it easier to reach the stationary tail rope on the Y-beam. With the holder attached to the Y-beam you can easily reach the tail rope while mooring and will also get a handy holder to place the tail rope on when you are sailing away again.

The tail rope holder is useful when you have a sailboat or a larger motorboat with a high rail.

By attaching the holder to the Y-beam you do not have to hang down over the rail of the boat to reach the tail rope, and do not run the risk of having things fall out of your pockets.

There is enough room for at least two tail ropes on the wide holder and you will no longer have to retrieve a wet rope out of the water when you come back from the boat trip. Tip! If you only need to hang one tail rope on the holder, you can always share it with the boat owner next to you.

The tail rope holder is 102 cm high and made of durable steel and UV-resistant plastic.

The holder has a super strong, rustproof spring at the base that allows it to be bent in every direction.

The spring is strong enough to keep the pole standing straight even in strong winds but ensures that the tail rope holder does not crack if it gets stuck.

Mounting the holder

The tail rope holder is easily mounted on the Y-beam with the accompanying cable ties.

There are also two pre-drilled holes (Ø0,8 mm) at the base if you want to screw the holder into the Y-beam (screws are not included).

Extra mounts

If you change harbour, or just want to change places of your tail rope holder, you can always buy new mounts (cable ties) for the Y-beam. You can buy new mounts for the tail rope holder, Y-beam here ->

If you are usually mooring your boat at a normal jetty, you can also buy extra mounts to place the holder on the side of a wooden bollard. You can buy new mounts for the tail rope holder, wooden bollard here ->

The tail rope holder Mr. Mooring flexible is made in Sweden.

Included in the package

Tail rope holder Mr Mooring Flexible

2 sturdy cable ties for mounting the holder on a Y-beam

Material

UV-resistent HD polyethylene och polycarbonate

Measurements

Height: 102 cm

Width: 29 cm